Product Billboard

Find a Supplier
Free Product Literature
Search Product Database
Browse Suppliers' Pages
Links to Suppliers
Product Report of the Month
Previous Product Reports
Contractors and Craftsmen
Traditional Building Magazine
Articles Online
Advertising Information
Advertiser Website Results
Advertising on this Site
Getting Listed on this Site
Subscribe Now!
Change of Address
Contact Traditional Building
Editorial Calendar
Palladio Awards

About Traditional Building
SiteMap
Getting Listed on this Site
Contact Traditional Building

Articles Online
Links to Related Sites
Contractors and Craftsmen

Period-Homes.com

www.Traditional-Building.com

Product Report of the Month

CLAY TILE ROOFS: REPAIRING & INSTALLING

Tile Suppliers, Consultants & Contractors for Old and New Tile Roofs

Click here for List of Suppliers of New and Salvaged Roof Tile
 

Click here for List of Consultants specializing in Traditional Roofing Materials

More than any other roof type, the traditional tile roof is an architectural feature deserving of special attention -- because the texture, color, and play of light and shadow impart a distinctive character to a building that no other roof type can match. Yet tens of thousands of tile roofs have been lost in recent decades because of the ignorance or laziness of low-level roofing repair contractors. When a contractor says of a tile roof: "That can't be repaired," it only means that he or she can't repair it!

REPAIR, DON'T REPLACE: Because installing a new tile roof is labor-intensive, initial cost is high. But when initial costs are amortized over the life expectancy of the roof, a clay tile roof can be very cost-effective. The high value of a tile roof is the primary reason to seek ways to repair -- rather than replace -- if at all possible.

SOURCES OF FAILURE: Well-made clay roofing tiles are extremely durable; most will last over a century under most conditions. If a tile roof is leaking, common causes are: (a) Failure of metal flashings; (b) Failure of the metal fasteners; (c) A few broken tiles caused by careless roofers, cascading ice, etc. Unless all the tiles have been smashed by a catastrophic hail storm, it's unusual to find that all the tiles on a roof are "worn out."

REPAIR OPTIONS: If failure of metal flashings is the source of most leaks, it's possible to lift a limited number of tiles, replace all flashings, and re-lay the original tiles. During this process, you may also find some broken or cracked tiles. (An experienced roofer can tell by gentle tapping whether a tile retains its structural integrity, or has hidden fissures.) Cracked or missing tiles should be replaced at this time. Work on an existing tile roof must be done by an experienced roof tile contractor; an inexperienced contractor may break more tiles than he/she replaces.

TRICKS OF TILE MATCHING: Tile replacement on an existing roof raises the issue of tile matching. The accompanying list of Roof Tile Suppliers contains several companies that maintain large inventories of salvaged roof tile -- and they can be quite helpful in locating matching tiles. If you can't find an exact match, a frequently used trick is to scavenge tiles from the least visible part of the roof -- use these for patching -- and fill in the vacant spot in the inconspicuous roof area with the "near-miss" tiles. Salvaged tiles that match the original tiles can also be a cost-effective solution if you're making an addition to a tile-roofed building, and matching tiles are not currently in production as a standard item. If at all possible, try to avoid getting into custom production of matching clay roof tiles. Manufacturing exact matches of color, shape, and texture in fired-clay roof tiles is as much an art as a science, and is thus a lengthy -- and costly -- process.

FASTENER FAILURE: Sometimes a roof will start shedding perfectly good roof tiles because the original installer used cheap galvanized nails instead of copper. If the galvanized nails are rusting and failing, the only satisfactory solution is to remove all the tiles and re-lay them using copper or stainless steel nails. Even though this is a labor-intensive process, the end result will be a lot more satisfactory -- and long-lasting -- than an asphalt-shingle replacement.

LOOK-ALIKE MATERIALS: Fired-clay roof tiles are definitely a premium-grade roofing material -- and are priced accordingly. There are also substitute roofing materials -- including metal and concrete -- that can create the appearance of a clay tile roof at a saving in cost, and sometimes weight. The accompanying list of replica suppliers will point you toward some of the leading manufacturers of look-alike substitute roofing materials.

THE RIGHT CONTRACTOR: As pointed out above, when dealing with a clay tile roof -- whether repair or a completely new installation -- it's essential to deal with a contractor who's experienced in handling roof tile. The accompanying Contractor List contains the names of some contractors who have established national reputations.

This report was compiled from recent issues of TRADITIONAL BUILDING magazine. Each issue contains 15 or more such reports covering products and services used in restoration, renovation, and historically inspired new construction. If you would like to subscribe, please visit our subscription page.

Click here for Suppliers of New & Salvaged Roof Tile

Click here for Consultants specializing in Traditional Roofing Materials


Click here for Contractors specializing in Traditional Roofing Materials

Click here for Previous Product Reports


Free Product Literature
Previous Product Reports
Articles Online

 
Back to top

www.Traditional-Building.com
Home | Search Suppliers| Resources | Subscriptions | Advertising
About Us
| SiteMap | Contact Us

Copyright 2009Restore Media LLC. All Rights Reserved.